Food waste tectonics: Points of friction between policy push and practice pull in council-led household-food-waste interventions in Australia.

Household food waste is increasingly recognised as a global wicked problem for its greenhouse gas emissions, economic damage, and resource loss. Although targeted in the UN's Sustainable Development Goals, countries can only respond according to their capacity. For Australia, national policy has put the pressure on states and territories to divert food waste away from landfill into a nascent circular economy. For councils, this increasingly means implementing a FOGO (Food Organics/Garden Organics) kerbside collection. Despite funding and infrastructure development, many are resisting. Framed by the tenets of policy diffusion, this paper presents the results of a nationwide exploratory survey aimed at identifying how and why council-based waste services staff resist, emulate or lead FOGO implementation. By assessing participants current kerbside systems and their attitudes towards household food waste management, the survey found costs, contamination, and capacity and were key concerns. However, responses to these varied considerably despite similarities of situation, often relating more to collaborative attitudes across waste services, council, and councillors. This paper recognises that a conducive environment for change is urgently needed for Australia to achieve organics diversion targets and shift household food towards a circular economy. It provides a starting point for further research into the complex and nuanced dynamics between council waste services and FOGO implementations, from external drivers and council paradigms to individual attitudes and perceptions.

Solidification/stabilization and optimization of municipal solid waste incineration fly ash with aluminosilicate solid wastes.

Alkali-activation is an effective municipal solid waste incineration fly ash (MSWIFA) solidification/stabilization (S/S) technology. However, the characteristics of calcium-rich silica-poor aluminum phase in MSWIFA easily cause the structural instability and contamination of alkali activated MSWIFA S/S bodies. Therefore, the aluminosilicate solid wastes are used in this work to optimize the immobilization and structural properties. Results showed that incorporation of aluminosilicate solid wastes significantly improved the compressive strength and heavy metals pollution toxicity of MSWIFA S/S bodies. Compared to alkali activated MSWIFA, the compressive strength of S/S bodies with addition of coal fly ash, silica fume and granulated blast furnace slag improved by 31.0%, 47.6% and 50.8% when the curing time was 28 days, respectively. Leachability of Pb, Zn and Cd in these alkali activated MSWIFA S/S bodies was far below the threshold value specified in Standard GB16889. Aluminosilicate solid wastes provided abundant Si/Al structural units, and some new phases such as ettringite(AFt, 3CaO⋅Al2O3⋅3CaSO4⋅32H2O), calcium sulfoaluminate hydrate (3CaO⋅Al2O3⋅CaSO4⋅12H2O) and Friedel's salt (CaO⋅Al2O3⋅CaCl2⋅10H2O) can be detected in S/S matrix with aluminosilicate solid wastes, along comes increased the amount of the amorphous phases. Lower Ca/Si molar ratio tended to form the network structure gel similar to tobermorite with higher polymerization degree. Meanwhile, the silica tetrahedron of the gels changed from the oligomerization state like island to the hyperomerization state like chain, layer network or three-dimensional structure, and average molecular chain length increased. These findings provide theoretical basis for structural properties optimization and resource utilization of MSWIFA S/S matrices.

Multi-stage aeration regime to regulate organic conversion toward gas alleviation and humification in food waste digestate composting.

Aerobic composting has been considered as a pragmatic technique to convert food waste digestate into high-quality biofertiliser. Nevertheless, massive gaseous emission and immature product remain the primary challenges in food waste digestate composting. Thus, the performance of multi-stage aeration regimes to improve gaseous emissions and organic humification during food waste digestate composting was investigated in this study. In addition to continuous aeration with a constant intensity of 0.3 L kg·dry mass (DM)-1·min-1, two multi-stage decreased aeration regimes were designed as "0.3-0.2-0.1" and "0.3-0.1-0.1" L·kg·DM-1·min-1 from the thermophilic to cooling and then mature stages, respectively. Results showed that the decreased aeration regimes could alleviate nitrous oxide (N2O) and ammonia (NH3) emission and slightly enhance humification during composting. The alleviated N2O and NH3 emission were mainly contributed by abiotically reducing gaseous release potential as well as biotically inactivating denitrifers (Pusillimonas and Pseudidiomarina) and proliferating Atopobium to reduce nitrate availability under lower aeration supply. The "0.3-0.2-0.1 L kg·DM-1·min-1" regime exhibited a more excellent performance to alleviate N2O and NH3 emission by 27.5% and 16.3%, respectively. Moreover, the decreased aeration regimes also favored the enrichment of functional bacteria (Caldicoprobacter and Syntrophomonas) to accelerate lignocellulosic biodegradation and thus humic acid synthesis by 6.5%-11.2%. Given its better performance to improve gaseous emissions and humification, the aeration regime of "0.3-0.2-0.1 L kg·DM-1·min-1" are recommended in food waste digestate composting in practice.

Modification of bentonite with black cotton soil and carboxyl methyl cellulose for the enhancement of hydraulic performance of geosynthetic clay liners.

Geosynthetic clay liners (GCLs) are mostly used as flow barriers in landfills and waste containments due to their low hydraulic conductivity to prevent the leachate from reaching the environment. The self-healing and swell-shrink properties of soft clays (expansive soils) such as bentonite enable them as promising materials for the GCL core layers. However, it is important to modify their physico-chemical properties in order to overcome the functional limitations of GCL under different hydraulic conditions. In the present study, locally available black cotton soil (BCS) is introduced in the presence of an anionic polymer named carboxymethyl cellulose (CMC) as an alternative to bentonite to enhance the hydraulic properties of GCL under different compositions. The modified GCL is prepared by stitching the liner with an optimum percentage of CMC along with various percentages of BCS mixed with bentonite. Hydraulic conductivity tests were performed on the modified GCL using the flexi-wall permeameter. The results suggest that the lowest hydraulic conductivity of 4.58 × 10-10 m/s is obtained when 25% of BCS is blended with bentonite and an optimum 8% CMC and further addition of BCS results in the reduction of the hydraulic conductivity.

Environmental sustainability assessment of a new food waste anaerobic digestion and pyrolysis hybridization system.

This research conducted an environmental life cycle assessment (LCA) to evaluate an anaerobic digestion-co-pyrolysis (ADCo-Py) system in which pyrolysis was added to traditional food waste (FW) anaerobic digestion (AD) systems to treat the solid fraction and impurities separated from FW. The solid fraction, including impurities such as wooden chopsticks, plastics, eggshells, and bones, is usually incinerated, while pyrolysis can be a viable alternative to optimize FW treatment. The environmental impact of ADCo-Py was compared with stand-alone AD, pyrolysis, and ADCo-INC (AD with incineration of separated solids). The results indicated that both ADCo-Py (-1.726 kg CO2-Eq/kgFW) and ADCo-INC (-1.535 kg CO2-Eq/kgFW) outperform stand-alone AD (-0.855 kg CO2-Eq/kgFW) and pyrolysis (-0.181 kg CO2-Eq/kgFW) in mitigating global warming potential (GWP). Additionally, pretreatments were found to have the most significant influence on GWP, ecotoxicity potential (ETP), and acidification potential (AP). The two-step pretreatment in ADCo-Py, including the separation of solids and drying, significantly improved the environmental sustainability of the system when compared with standalone pyrolysis.

A novel biochar-augmented enzymatic process for conversion of food waste to biofertilizers: Planting trial with leafy vegetable.

The present study developed a novel biochar-augmented enzymatic approach for fast conversion of food waste to solid and liquid biofertilizers. By augmented with 10 % of biochar and mediated with 5 % of food waste-derived hydrolytic enzymes mixture (i.e. fungal mash), 100 kg of food waste could be converted into 22.3 kg of solid biofertilizer with a water content of 30 % and 55.0 kg of liquid biofertilizer, which fulfilled Chinese national standards for solid and liquid organic biofertilizers, respectively. Field plantation results showed that the Pak Choi grown on food waste-derived biofertilizers was comparable with that on commercial ones, in terms of the vegetable productivity and nutrient contents. It was further revealed that the application of food waste-derived biofertilizers did not change soil chemical properties but enriched microbial diversity. This study clearly indicated that the biochar-augmented enzymatic approach for food waste conversion to biofertilizers was technically feasible and economically viable towards circular agriculture economy.

Phosphate additives promote humic acid carbon and nitrogen skeleton formation by regulating precursors and composting bacterial communities.

This study aimed to compare the effect of different phosphate additives including superphosphate (CP) and MP [Mg(OH)2 + H3PO4] on nitrogen conversion, humus fractions formation and bacterial community in food waste compost. The results showed the ratio of humic acid nitrogen in total nitrogen (HA-N/TN) in CP increased by 49 %. Ammonium nitrogen accumulation was increased by 75 % (CP) and 44 % (MP). Spectroscopic techniques proved that phosphate addition facilitated the formation of complex structures in HA. CP enhanced the dominance of Saccharomonospora, while Thermobifida and Bacillus were improved in MP. Structural equation modeling and network analysis demonstrated that ammonium nitrogen can be converted to HA-N and has positive effects on bacterial composition, reducing sugars and amino acids, especially in CP with more clustered network and synergic bacterial interactions. Therefore, the addition of phosphate provides a new idea to regulate the retained nitrogen toward humification in composting.

Recovery of plastic packaging from mixed municipal solid waste. A case study from Austria.

Austria must recycle more packaging materials. Especially for plastic packaging waste, significant increases are necessary to reach the EU recycling targets for 2025 and 2030. In addition to improving separate collection and introducing a deposit system for specific fractions, the share of plastic packaging in mixed municipal solid waste (MSW) could be utilized. In Austria, about 1.8milliontonnes of mixed MSW are generated. This includes about 110,000 t/a of plastic packaging waste. Most of the mixed MSW (94 %) is sent directly or via residues from pre-treatment, such as mechanical-biological treatment or waste sorting, to waste incineration. While materials such as glass and metals can also be recovered from the bottom ash, combustible materials such as plastics must be recovered before incineration. This work aims to evaluate the recovery potential of plastic packaging waste in mixed MSW with automated waste sorting. For this purpose, two of the largest Austrian waste sorting plants, with a total annual throughput of about 280,000 t/a, were investigated. The investigation included regular sampling of selected output streams and sorting analysis. The results show that the theoretical recovery potential of plastic packaging from these two plants is 6,500 t/a on average. An extrapolation to Austria results in a potential of about 83,000 t/a. If losses due to further treatment, such as sorting and recycling, are considered, about 30,000 t/a of recyclate could be returned to plastic production. This would correspond to an increase in plastic packaging recycling rate from 25 % to 35 %.

Lessons learned from a UAV survey and methane emissions calculation at a UK landfill.

Accurate quantification of methane emissions from landfills is crucial for improving greenhouse gas inventories and mitigating climate change impacts. Existing methodologies, such as theoretical gas production models and labour-intensive measurement approaches, present limitations including large uncertainties and high operational costs. This study adds to a growing body of research and applications which aim to bridge this gap. To this end, we present a case study using Unmanned Aerial Vehicles (UAVs) equipped with methane and wind instrumentation for a survey of a landfill site in Bury, Manchester, UK, in summer 2022, in order to evaluate and reflect the challenges of the UAV-based mass balance method for quantification of methane emissions from a large heterogeneous source such as landfill. This study offers guidance on defining an appropriate methane background concentration, geospatial interpolation of sampled date, survey sampling strategy, and more importantly, addresses the challenges surrounding UAV wind measurements and spatial characterisation of emission plumes. For the period of the case study, we quantified methane flux for the landfill site to be 150.7 kg h-1 with a 1 standard deviation uncertainty range of 83.0 kg h-1 to 209.5 kg h-1.

Medical waste incineration fly ash-based magnesium potassium phosphate cement: Calcium-reinforced chlorine solidification/stabilization mechanism and optimized carbon reduction process strategy.

The traditional solidification/stabilization (S/S) technology, Ordinary Portland Cement (OPC), has been widely criticized due to its poor resistance to chloride and significant carbon emissions. Herein, a S/S strategy based on magnesium potassium phosphate cement (MKPC) was developed for the medical waste incineration fly ash (MFA) disposal, which harmonized the chlorine stabilization rate and potential carbon emissions. The in-situ XRD results indicated that the Cl- was efficiently immobilized in the MKPC system with coexisting Ca2+ by the formation of stable Ca5(PO4)3Cl through direct precipitation or intermediate transformation (the Cl- immobilization rate was up to 77.29%). Additionally, the MFA-based MKPC also demonstrated a compressive strength of up to 39.6 MPa, along with an immobilization rate exceeding 90% for heavy metals. Notably, despite the deterioration of the aforementioned S/S performances with increasing MFA incorporation, the potential carbon emissions associated with the entire S/S process were significantly reduced. According to the Life Cycle Assessment, the potential carbon emissions decreased to 8.35 × 102 kg CO2-eq when the MFA reached the blending equilibrium point (17.68 wt.%), while the Cl- immobilization rate still remained above 65%, achieving an acceptable equilibrium. This work proposes a low-carbon preparation strategy for MKPC that realizes chlorine stabilization, which is instructive for the design of S/S materials.

Pilot-scale membrane-covered composting of food waste: Initial moisture, mature compost addition, aeration time and rate.

The impact of different operational parameters on the composting efficiency and compost quality during pilot-scale membrane-covered composting (MCC) of food waste (FW) was evaluated. Four factors were assessed in an orthogonal experiment at three different levels: initial mixture moisture (IMM, 55 %, 60 %, and 65 %), aeration time (AT, 6, 9, and 12 h/d), aeration rate (AR, 0.2, 0.4, and 0.6 m3/h) and mature compost addition ratio (MC, 2 %, 4 %, and 6 %). Results indicated that 55 % IMM, 6 h/d AT, 0.4 m3/h AR, and 4 % MC addition ratio simultaneously provided the compost with the maximum cumulative temperature and the minimum moisture. It was shown that the IMM was the driving factor of this optimum composting process. On contrary, the optimal parameters for reducing carbon and nitrogen loss were 65 % IMM, 6 h/d AT, 0.4 m3/h AR, and 2 % MC addition ratio. The AR had the most influence on reducing carbon and nitrogen losses compared to all other factors. The optimal conditions for compost maturity were 55 % IMM, 9 h/d AT, 0.2 m3/h AR, and 6 % MC addition ratio. The primary element influencing the pH and electrical conductivity values was the AR, while the germination index was influenced by IMM. Protein was the main organic matter limiting the composting efficiency. The results of this study will provide guidance for the promotion and application of food waste MCC technology, and contribute to a better understanding of the mechanisms involved in MCC for organic solid waste treatment.

Environmental performance of unfired bricks produced from co-disposal of mine tailings and municipal solid waste incineration fly ash based on comprehensive leaching tests.

The potential leaching of heavy metals is a crucial concern for construction materials produced from solidification/stabilization (S/S) treatment of wastes. This study comprehensively evaluated the leaching characteristics of heavy metals from the unfired bricks produced from co-disposal of Pb-Zn mine tailings and municipal solid waste incineration fly ash using batch, sequential, and semi-dynamic leaching tests. The results show that S/S treatment drastically reduced the leachability of heavy metals from the unfired bricks through lowering their distribution in the acid-soluble fraction. The effective diffusion coefficients of heavy metals within unfired bricks were all below 1.55 × 10-13 cm2/s, which is indicative of low mobility in the environment. The release of heavy metals from the unfired bricks was primarily governed by diffusion and dissolution. Slaking treatment of fly ash significantly reduced the leaching of heavy metals from the unfired bricks due to their improved structural integrity and compactness, which minimizes the surface area in the solid matrix accessible by the leaching medium. The leachability indices of heavy metals within the unfired bricks ranged from 13.12 to 18.10, suggesting that they are suitable for "controlled utilization" in specific scenarios. Compared to untreated mine tailings, converting them into unfired bricks could reduce the releases of heavy metals by several to hundreds of folds. These findings demonstrate that S/S can be an effective and sustainable strategy for co-disposal of mining tailings and incineration fly ash to produce construction materials with sound long-term environmental performance.

Effect of PFDS on the immobilization of Cs+ by metakaolin-based geopolymers in complex environments.

Metakaolin-based geopolymers are very promising materials for improving the safety of low and intermediate level radioactive waste disposal, with respect to ordinary Portland cement, due to their excellent immobilization performance for Cs+ and superior chemical stability. However, their application is limited by the fact that the leaching behavior of Cs+ is susceptible to the presence of other ions in the environment. Here, we propose a way to modify a geopolymer using perfluorodecyltriethoxysilane (PDFS), successfully reducing the leaching rate of Cs+ in the presence of multiple competitive cations due to blocking the diffusion of water. The leachability index of the modified samples in deionized water and highly concentrated saline water reached 11.0 and 8.0, respectively. The reaction mechanism between PDFS and geopolymers was systematically investigated by characterizing the microstructure and chemical bonding of the material. This work provides a facile and successful approach to improve the immobilization of Cs ions by geopolymers in real complex environments, and it could be extended to further improve the reliability of geopolymers used in a range of applications.

Investigation on trommeled legacy waste from full-scale mining of old dumpsites: Suitable for valorization or scientific disposal?

The burgeoning interest in resource recovery from old dumpsites has significantly propelled the adoption of Landfill Mining (LFM) in recent years. This study is centred around evaluating the quality of materials recovered from the full-scale LFM activities at two major dumpsites in India, focusing on the valorization potential of the segregated legacy waste. A detailed analysis was conducted on the segregated waste fractions based on particle size (-30 mm, 30 to 6 mm, and -6 mm, as sourced from the sites), employing both batch and column leaching methods across a range of liquid-to-solid (L/S) ratios (0.1-10.0 L/kg). The findings reveal a pronounced concentration of contaminants within the -6 mm fraction compared to the 30 to 6 mm and -30 mm fractions. Column leaching tests revealed a reduction in contaminant concentration, correlating with incremental changes in L/S ratio. Notably, this trend remained consistent across varying particle sizes and specific type of contaminants assessed. Notably, color intensity of leachate reduced significantly from 720 to 1640 Platinum Cobalt Units (PCU) at an L/S ratio of 0.1 L/kg to a minimal 94-225 PCU at an L/S of 10 L/kg. Dissolved salts emerged as a primary concern, marking them as significant contaminants in both leaching methods. The analysis confirmed that the segregated fractions comply with the USEPA Waste Acceptance Criteria (WAC), permitting their disposal in non-hazardous waste landfills. However, the elevated presence of dissolved salts, exceeding reuse limits by 5-35 times, limits their open or unrestricted reuse. Despite this, isolated reuse aligns with regulations from the Netherlands and Germany, suggesting viable pathways for compliant utilization. Geotechnical assessments indicate the potential for repurposing the -30 mm fraction as alternative earthfill and construction material. While heavy metal leaching does not pose significant concerns, the prevalent unscientific disposal practices near urban settlements highlight potential human health risks. This investigation enriches the understanding of the physicochemical properties, leaching behaviour, and reuse potential of segregated legacy waste, offering crucial insights for civic authorities in determining appropriate reuse and disposal strategies for such materials.

Effect of long-term dry-wet circulations on the Solidification/stabilization of Municipal solid waste incineration fly ash using a novel cementitious material.

Solidification/stabilization (S/S) is a typical technique to immobilize toxic heavy metals in Municipal solid waste incineration fly ash (MSWI FA). This study utilized blast furnace slag, steel slag, desulfurization gypsum, and phosphoric acid sludge to develop a novel metallurgical slag based cementing material (MSCM). Its S/S effects of MSWI FA and long-term S/S effectiveness under dry-wet circulations (DWC) were evaluated and compared with ordinary Portland cement (OPC). The MSCM-FA block with 25 wt.% MSCM content achieved 28-day compressive strength of 9.38 MPa, indicating its high hydration reactivity. The leaching concentrations of Pb, Zn and Cd were just 51.4, 1895.8 and 36.1 µg/L, respectively, well below the limit standard of Municipal solid wastes in China (GB 16889-2008). After 30 times' DWC, leaching concentrations of Pb, Zn and Cd for MSCM-FA blocks increased up to 130.7, 9107.4 and 156.8 µg/L, respectively, but considerably lower than those for OPC-FA blocks (689, 11,870.6 and 185.2 µg/L, respectively). The XRD and chemical speciation analysis revealed the desorption of Pb, Zn and Cd attached to surface of C-S-H crystalline structure during the DWC. The XPS and SEM-EDS analysis confirmed the formation of Pb-O-Si and Zn-O-Si bonds via isomorphous replacement of C-A-S-H in binder-FA blocks. Ettringite crystalline structure in OPC-FA block was severely destructed during the DWC, resulting in the reduced contents of PbSO4 and CaZn2Si2O7·H2O and the higher leachability of Pb2+ and Zn2+.

Variability of the treated biomedical waste disposal behaviours during the COVID lockdowns.

Literature review suggests that studies on biomedical waste generation and disposal behaviors in North America are limited. Given the infectious nature of the materials, effective biomedical waste management is vital to the public health and safety of the residents. This study explicitly examines seasonal variations of treated biomedical waste (TBMW) disposal rates in the City of Regina, Canada, from 2013 to 2022. Immediately before the onset of COVID-19, the City exhibited a steady pattern of TBMW disposal rate at about 6.6 kg∙capita-1∙year-1. However, the COVID-19 pandemic and its associated lockdowns brought about an abrupt and persistent decline in TBMW disposal rates. Inconsistent fluctuations in both magnitude and variability of the monthly TBMW load weights were also observed. The TBMW load weight became particularly variable in 2020, with an interquartile range 4 times higher than 2019. The average TBMW load weight was also the lowest (5.1 tonnes∙month-1∙truckload-1) in 2020, possibly due to an overall decline in non-COVID-19 medical emergencies, cancellation of elective surgeries, and availability of telehealth options to residents. In general, the TBMW disposal rates peaked during the summer and fall seasons. The day-to-day TBMW disposal contribution patterns between the pre-pandemic and post-pandemic are similar, with 97.5% of total TBMW being disposed of on fixed days. Results from this Canadian case study indicate that there were observable temporal changes in TBMW disposal behaviors during and after the COVID-19 lockdowns.

Global perspective of municipal solid waste and landfill leachate: generation, composition, eco-toxicity, and sustainable management strategies.

Globally, more than 2 billion tonnes of municipal solid waste (MSW) are generated each year, with that amount anticipated to reach around 3.5 billion tonnes by 2050. On a worldwide scale, food and green waste contribute the major proportion of MSW, which accounts for 44% of global waste, followed by recycling waste (38%), which includes plastic, glass, cardboard, and paper, and 18% of other materials. Population growth, urbanization, and industrial expansion are the principal drivers of the ever-increasing production of MSW across the world. Among the different practices employed for the management of waste, landfill disposal has been the most popular and easiest method across the world. Waste management practices differ significantly depending on the income level. In high-income nations, only 2% of waste is dumped, whereas in low-income nations, approximately 93% of waste is burned or dumped. However, the unscientific disposal of waste in landfills causes the generation of gases, heat, and leachate and results in a variety of ecotoxicological problems, including global warming, water pollution, fire hazards, and health effects that are hazardous to both the environment and public health. Therefore, sustainable management of MSW and landfill leachate is critical, necessitating the use of more advanced techniques to lessen waste production and maximize recycling to assure environmental sustainability. The present review provides an updated overview of the global perspective of municipal waste generation, composition, landfill heat and leachate formation, and ecotoxicological effects, and also discusses integrated-waste management approaches for the sustainable management of municipal waste and landfill leachate.

Preparation of functional geopolymers from municipal solid waste incineration fly ash: An approach combining experimental and computational simulation studies.

This study aims to evaluate the feasibility and safety of using municipal solid waste incineration fly ash (MSW-IFA) in the development of geopolymer-based solidification/stabilization (S/S) treatments. Geopolymers have garnered attention as a sustainable alternative to traditional cement, owing to their high strength, stability, and minimal CO2 emissions. In this study, a combination of experimental and simulation calculations was used to investigate the setting time, mechanical properties, environmental risks, hydration mechanisms and processes of municipal solid waste incineration fly ash-based polymeric functional cementitious materials (GFCM). The results demonstrate that the mechanical properties of GFCM are related to the changes in the mineral phases and the degree of compactness. Quantum chemical calculations indicate that the hydration products may be [Si(OH)4], [Al(OH)3(OH2)] and [Al(OH)4]-. It is possible that the heavy metals are embedded in the hydrated silica-aluminate by electrostatic interaction or chemisorption. Heavy metals may be embedded in hydrated silica-aluminate by electrostatic action or chemisorption. This study provides a feasible method for resource utilization and heavy metal stabilization mechanism of MSW-IFA.

Characterisation and agronomic evaluation of acidified food waste anaerobic digestate products.

Raw liquid anaerobic digestate was synthesised into nutrient-dense solid digestates via acidification and evaporation. Acidification retained ammonium in the digestate whilst also donating the anion to free ammonium to form an ammonium salt. Digestate was treated with the addition of sulphuric, nitric, and phosphoric acid resulting in the formation of ammonium sulphate, ammonium nitrate and ammonium phosphate, respectively then evaporated into a solid fertiliser product. FTIR, XRD and SEM-EDS collectively confirm that the addition of acids completely converted the free ammonium in the raw digestate into their respective ammonium salt counterparts. Compounds of potassium chloride, silicon dioxide, calcium carbonate, magnesium ammonium phosphate, sodium nitrate, and sodium chloride were identified in all solid digestate samples. Plant growth and grain yield was higher in urea ammonium nitrate, raw liquid digestate and acidified digestate products compared to control and unacidified solid digestate. Urea ammonium nitrate and ammonium nitrate solid digestate had the highest dry shoot, likely due to the high available nitrogen found in both fertilisers. Overall, acidification and evaporation of liquid digestate can efficiently transform it into a valuable solid fertiliser with a high nutrient density. This process not only has the potential to mitigate handling and storage constraints of low nutrient density digestate in anaerobic digestion facilities but also offers a sustainable alternative to conventional fertilisers.

Solid waste management practices and challenges in Besisahar municipality, Nepal.

This study is a comprehensive assessment of the waste management system in Besisahar municipality. Information and some data have been collected from the municipality of Besisahar, followed by interviews with municipal officials responsible for waste management, stakeholders, waste workers, and residents. A total of 230 households, 20 schools, 10 government and private offices, 10 financial institutions, 60 commercial hotels, restaurants, and shops, and 20 medical shops and healthcare institutions, were selected in this study by random sampling. An extensive field study was conducted within all municipal wards and at dump sites. The results indicated that 42.14% of solid waste was collected through door-to-door collection services, 5.87% was mismanaged in open public places, 11.21% was used as compost manure, and the rest was discarded on riverbanks, dug up, and burned. A large component of the characterization of household waste consisted of organic waste (68.03%), followed by paper/paper products (8.13%), agricultural waste (5.5%), plastic (5.21%), construction (3.81%), textile (2.72%), metals (0.54%), glass (1.01%), rubber (0.10%), electronic (0.05%), pharmaceutical (0.1%) and others (4.78%) in the Besishahar municipality. Solid waste generation was found to be at 197.604 g/capita/day, as revealed by cluster sampling in 230 households. Around 4.285 tons-solid waste/day were generated in urban areas, while 16.13 tons-solid waste/day was estimated for the whole municipality. An important correlation between the parameters of solid waste was found by statistical analysis. Currently, solid waste is dumped on riverbanks, open fields, and springs, creating environmental and health hazards. The findings of this study will be useful to Besisahar municipality and its stakeholders in forming policies that facilitate waste management practices in this region and promote sustainable waste management systems.